WSLP-2.5USF Series Liquid Polymer Prep System

The WSLP-2.5USF Series uses a direct drive mix chamber. This ready-to-install system provides consistent and accurate dosage that improves polymer efficiency. This series is designed for easy installation, operation, and maintenance. The compact size of the feeder allows trouble-free installation in confined spaces and the open frame design facilitates easy component access.

WSLP-600 and WSLP-2400 Series Liquid Polymer Prep Systems

The WSLP-600 and WSLP-2400 Series Liquid Polymer Prep Systems use multi-zone mixing. The first zone exposes the polymer to a high energy environment to minimize agglomeration. Reduced mixing energy in the second zone protects the fragile polymer chains from fracturing, making more polymer available for work. The baffling is designed to create a tapered mixing regime. The optional variable speed mixing optimizes the hydration process within each zone regardless of the type of polymer in use. Whether you adjust the output remotely or right at the unit, water flow and polymer feed increase and decrease together, automatically maintaining constant solution strength. Even primary and secondary dilution water is kept at the same ratio as output is adjusted.

Read More»

WSLP1-30 Liquid Polymer Prep System

The WS1-30 series is the simplest and most economical pump series. The WS1-30 series meters the polymer with a progressive cavity pump. The polymer is injected through a self-cleaning check valve into the system water supply prior to a static mixer. The result is a solution that can be sent directly to the application point (in-line direct feed) or to an application tank with level controls.

WSLP30-70 Liquid Polymer Prep System

The WS30-70 series meters the polymer with a progressive cavity pump. The polymer is injected through a self-cleaning check valve into a viscosity equalizing recirculation loop. The multi-stage mixer then initiates activation of the diluted polymer with high speed blending. The result is a solution that is ready to send to an application tank with level controls for metering into the process with no further agitation required.

WSLP5-30 Liquid Polymer Prep System

The WSLP5-30 series is the simplest and most economical pump series. The WSLP5-30 series meters the polymer with a progressive cavity pump. The polymer is injected through a self-cleaning check valve into the system water supply prior to a static mixer. The result is a solution that can be sent directly to the application point (in-line direct feed) or to an application tank with level controls.

WSMP2.5-10 Mannich Polymer Prep System

Mannich Preparation Systems are designed for long-term, dependable operation. Every design incorporates years of field experience with Mannich preparation with the knowledge of the leading manufacturer of water-soluble polymers. The WS30-70 series meters the high viscosity Mannich with a progressive cavity pump, and a specifically designed injection device for viscosity equalization into the dilution water. The result is a solution that is ready to send to a polymer solution tank for further mixing, then into the process.